EN3 MINI WEATHERTIGHT CONNECTOR SERIES
42
CONNECTORS & RECEPTACLES
?
PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
CRIMP CONTACT
CRIMP TOOLS
INSERTION INSTRUCTIONS
Part Number
EN3INS16
EN3INS20
EN3CR
EN3CRAUTO
EN3POS16
EN3POS20
Tool Description
Insertion/Extraction Tool for 16 AWG
Insertion/Extraction Tool for 20 AWG
Crimp Hand Tool
Pneumatic Crimp Tool
Positioner for 16 AWG contacts and pins
Positioner for 20 AWG contacts and pins
CRIMP CONTACT
EXTRACTION INSTRUCTIONS
NOTE: A positioner must be used with the
EN3CR and EN3CRAUTO.
Note: Solder and PC contacts are factory assembled
CORD CONNECTOR ASSEMBLY INSTRUCTIONS
STEP 1
Cord Connector: To assemble the three-part cord connector, first feed the end of the cable through the boot, cable clamp
housing, and coupling ring in that order and position as shown in the figure below. NOTE: The coupling ring can also be
inserted onto the cord connector from the front. In-line Connector: Feed the end of the cable through the boot and cable
clamp housing in the order and position shown.
IN-LINE
CABLE
BOOT
COUPLING
RING
CORD
CONNECTOR
CABLE
BOOT
CABLE CLAMP
HOUSING
CONNECTOR
CABLE CLAMP
HOUSING
CONTACT PINS
O-RING
(MOLDED ONTO
CONTACT PINS
CORD CONNECTOR)
STEP 2
Next, strip the cable .218" as shown and begin soldering conductors to pins, or insert contacts crimped on wire starting
with contact #1 next to the "notch" and following with the remaining conductors counter-clockwise with #6 or #8 conductor
in the center.
3/8"
MAX.
7/32"
SOLDER
NOTCH (PIN #1
INDICATOR)
CORD
CONNECTOR
9/32"
3/8"
MAX.
7/32"
SOLDER
NOTCH (PIN #1
INDICATOR)
IN-LINE
CONNECTOR
9/32"
STEP 3
Push the cable clamp housing forward until it locks
into the connector body and snap the two clamps
into their compartments.
CORD CONNECTOR
CABLE CLAMPS
IN-LINE CONNECTOR
CABLE CLAMPS
STEP 4
CORD CONNECTOR
IN-LINE CONNECTOR
Finally, push the boot all the way forward to seat tightly
onto the cable clamp housing.
Remember: Cord connectors will not mate with each other. For cord-to-cord connection,
your customer must order a cord connector plus an in-line connector.
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
www.switchcraft.com
? Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
相关PDF资料
YFS-30-03-H-05-SB CONN RECPT 150POS 1.27MM GOLD
YFT-20-05-H-08-SB-K CONN HEADER 160POS 1.27MM GOLD
YFW-30-25-H-05-SB CONN STACKER 150POS 1.27MM T/H
YTE-150-02-L-5-645 CONN RCPT 250POS 2MM GOLD T/H
YTW-50-06-L-Q-400-110 CONN BOARD STKR HDR 200POS 2MM
Z15J CONN SPEAKER JACK HIGH POWER
0002066100 .062 MALE TERM GOLD 18-24AWG
0002072101 CONN TERM CRIMP AWG18-24 PCB
相关代理商/技术参数
Y3FT 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:FPC connectors (0.3mm pitch) Front lock with FPC tabs Easy-to-handle front lock structure
Y3MPC 功能描述:XLR 连接器 QG CONNECTOR RoHS:否 制造商:Neutrik 标准:Standard XLR 产品类型:Connectors 型式:Female 位置/触点数量:3 端接类型:Solder 安装风格:Cable 方向:Vertical
Y3-PL-W 制造商:Thomas & Betts 功能描述:
Y3V9 制造商:TAYCHIPST 制造商全称:Shenzhen Taychipst Electronic Co., Ltd 功能描述:ZENER DIODES
Y40 制造商:SMC Corporation of America 功能描述:4000 series standard connecting spacer
Y400 制造商:SMC Corporation of America 功能描述:Spacer, F.R.L. Piping Unit, 65 mm, 57 mm for AC40 Model 制造商:SMC 功能描述:Polycarbonate compact spacer,5mm width 制造商:SMC 功能描述:Modulo Intermedio Di Accoppiamento: Base
Y400-A 制造商:SMC Corporation of America 功能描述:Spacer; F.R.L. Piping Unit; for AC40 Models
Y400T 制造商:SMC Corporation of America 功能描述:Spacer, with bracket, F.R.L. Piping Unit, 96 mm, 81.5 mm for AC40 Model 制造商:SMC 功能描述:40 series compact T type spacer,5mm W 制造商:SMC 功能描述:Modulo Accoppiamento: Con Squadretta A T